Clearance
Buddies Toro E-Rig
Overview
A full rig experience, sized for the palm of your hand
The Toro brings water filtration, a replaceable heating atomizer, and four-stage heat control into a single-button device that fits in a pocket or bag. Built-in overcharge protection and a 1350mAh lithium-polymer cell keep it running through a full day, and every wear part detaches for cleaning or replacement rather than forcing a whole-unit swap.
- 1350mAh Li-Po battery
- USB-C charging
- 3.3–4.2V output
- Four heat settings
- Detachable glass bubbler
- Overcharge protection
- Carb cap doubles as dab tool
Key features
Why Buddies Toro E-Rig
Patented quartz atomizer
Quartz conducts heat naturally and draws less energy than comparable atomizer materials, holding flavor from the first pull to the last. Covered by US Patent No. 10,701,977.
One button, four heat settings
A single push-activated button cycles output from 3.3V to 4.2V, with a light display around the base of the bubbler indicating the selected setting.
1350mAh battery over USB-C
A 1350mAh lithium-polymer cell outlasts most e-rigs in this form factor, and built-in overcharge protection guards the pack during quick USB-C top-ups.
Every wear part detaches
Bubbler, atomizer, and carb cap all come apart for cleaning, and each is stocked as a replacement part so a single worn component never retires the device.
Media
Buddies Toro E-Rig in motion
Full specifications
Buddies Toro E-Rig — Technical data
Power
- Battery
- 1350mAh
- Cell type
- Lithium-polymer
- Output range
- 3.3–4.2V
- Heat settings
- 4
- Charging
- USB-C
- Protection
- Overcharge
Hardware
- Atomizer
- Quartz
- Atomizer seating
- Glass
- Bubbler
- Borosilicate glass
- Carb cap
- Doubles as dab tool
- Activation
- Single push button
- Patent
- US 10,701,977
Presentation
- Colorway
- White / Green
- Configurations
- E-Rig, Gift Set
- Gift set adds
- Carry case, dab tool
- Designed by
- Bear Rootz Inc.
- Origin
- Made in China
Quality & compliance
Certifications and testing
Toro hardware is designed by Bear Rootz Inc. and produced in an ISO 13485 medical device facility. The marks below are printed on Toro retail packaging.
ISO 13485
Manufactured in an ISO 13485 certified medical device facility, as stated on Toro retail packaging.
CE
Carries the CE mark for applicable European health, safety, and environmental requirements.
RoHS
Compliant with the Restriction of Hazardous Substances directive for electronic hardware.
FCC
Carries the FCC mark covering electromagnetic compliance.
WEEE
Marked for WEEE electronic waste handling — do not dispose of with standard household waste.
Adult use only (21+)
Packaging carries a 21+ restriction. Keep out of reach of children and pets.
FAQ
Frequently asked questions
Ordering
Both configurations contain the same Toro e-rig. The Gift Set adds a branded zip-close portable carry case and an exclusive Buddies dab tool, presented in retail gift packaging.
Technical
Four. The single push-activated button steps output from 3.3V to 4.2V, and a light display around the base of the bubbler indicates the active setting.
Over USB-C. The 1350mAh lithium-polymer battery includes built-in overcharge protection, and a USB charging cable ships in the kit.
The bubbler, bubbler mouthpiece, carb cap, heating coil, and USB charger are all sold separately under Buddies Toro Replacement Parts. Every part is Toro-specific and is not intended for other hardware.
Yes. The quartz atomizer is covered by US Patent No. 10,701,977.
Compliance
The Toro is designed by Bear Rootz Inc. and manufactured in an ISO 13485 medical facility. Retail packaging carries CE, RoHS, FCC, and WEEE markings alongside a 21+ restriction.
Packaging states the product is intended for adult use only, must be kept out of reach of children and pets, and is used at the purchaser’s own risk. Do not touch heating elements while hot and do not attempt to disassemble the device.
Shipping
Ships in 1–2 days
In-stock orders leave the warehouse within 1–2 business days.
Free shipping on orders $100+
Standard from $6.95, priced by zone. Ships to the continental United States only.
Defects replaced
Manufacturing defects are replaced or credited if reported within 30 days.